Encore THP – Temperature, Humidity, Pressure

Description

The electronics are covered by a threaded protective housing. The porosity of the housing is specially designed for proper ventilation and to prevent the passage of particles that could obstruct or alter the measurement.
For temperature and humidity measurements it is necessary to protect the sensor from solar radiation, precipitation and other weather phenomena that may alter the conditions around the sensor.
For this purpose, a plate guard has been designed to protect the sensor properly from solar radiation and precipitation. This guard has a special inner support that facilitates its placement indoors under optimum conditions.

Specifications:

• Dimensions: 65 x 20 x 20 x 20 mm (without cable and chainring guard) and 250 x 200 x 160 mm (without cable, with chainring guard)
• Operating temperature: -4°C a 85°C
• Layer porosity: 20 а 30 um
• Métrics: Temperature (SHT), Relative humidity (SHT), Atmospheric pressure (BMP)
• Rank: Temperature: -40°C to 105°C, Humidity: 0% to 100%, Pressure: 300 to -1250 hPa
• Resolution: Temperature: 0.01°C (SHT), Humidity: 0.01%, Pressure: 0.66 Pa
• Precision: Temperature: + 0.1°C (20°C to 50°), + 0.3°C (rest), Humidity. ±1,5 % Presión: ±50 Pa (300 a 1100 hPa, -20°C a 65°C)
• Volts: 2,15 a 3,6 V
• Direction of the chips (Bus I2C): THP v1.0: 0X45 (SHT35) y 0x76 (BMP388), THP v1.1: 0x45 (SHT35) y 0x77 (BMP390)